SolarEdge battery for Australia and New Zealand

7 September 2021 by
SolarEdge battery for Australia and New Zealand
AC Solar Warehouse Pty Ltd, Rob Birchall

What is the SolarEdge Energy Bank?

The  New  SolarEdge Energy bank is a 10kWh battery with a usable energy of 9.7kWh and a 100% depth of discharge capability.  The continuous output power is 5kW with a peak output power in backup mode of 7.5kW for 10 seconds.  The round trip efficiency of greater than 94.5% is one of the highest in the market.

Up to 3 batteries can be installed on the same inverter providing a capacity of up to 29.1 kWh.  To install more than one battery additional branch cables are required.  These are ordered separately.

The battery can be installed indoors or outdoors with an IP55 rating and operating temperature of -10 to +50 degrees Celsius.  The battery can be either wall mounted, using handles (purchased separately) or floor mounted using the purpose built floor stand (purchased separately).


What inverters work with the SolarEdge Energy Bank?

The compatible SolarEdge inverters for the Energy Bank is the  Genesis single phase inverters, Energy Hub single phase inverters and the Three Phase Hybrid Inverters .

How is the SolarEdge Energy Bank connected to the solar system?

The SolarEdge Energy Bank is used in combination with the DC Combiner Box.   Below is the schematic diagram for  non- backup applications .


For sites where backup configuration is required, SolarEdge Backup Interface facilitates connection to the grid, loads, solar system and even a generator if desired.

For large homes below is a possible configuration

The complete energy solution from one manufacturer

The  new  SolarEdge Energy Bank battery will compliment SolarEdge’s range of Smart modules, inverters, EV chargers and home automation providing homeowners with a complete energy solution from one manufacturer.

The Webinar below outlines the product benefits, sales strategies, installation best practices, and certification requirements you need to know


Add a SolarEdge Home Battery & backup Interface to an existing SolarEdge single-phase property and TradeUp the old SolarEdge inverter to Energy Hub for Free*

The award-winning Energy Hub inverter is designed to work with the new SolarEdge Home Battery with Backup Interface.

As an installer, when you add a SolarEdge Home Battery & Backup Interface to an existing SolarEdge single-phase system, you can TradeUp the existing SolarEdge single-phase inverter to the new Energy Hub inverter for free*.  Click here for more details and to organise your trade-up.

Homeowner Benefits

  • Latest generation Energy Hub inverter, free.
  • New 12-year Energy Hub warranty.
  • Opportunity to add more panels to an existing system.
  • Opportunity to install an SolarEdge EV charger when ready
  • Opportunity to install Smart Home Energy devices when ready
Installer Benefits
  • Free replacement Energy Hub inverter equivalent to the one installed.
  • An opportunity to re-engage your existing customer base with an incentive to transition towards greater grid independence with battery storage and backup.

Want to offer SolarEdge to your customers?

Contact AC Solar Warehouse the largest SolarEdge distributor in Australia and New Zealand.
Click  here for contact details